"Warded Round Iron Padlocks (Pancake) - Q thru Z"
![](Javascript: show_picture("pictures/panwdi/reese_538.jpg");){kind=small}
|
"REESE".
The reverse of the case is the same as the obverse.
Nickel plated finish. Mfg by: Reese Padlock Co.
"The David Heuermann Collection" |
538 |
![](Javascript: show_picture("pictures/panwdi/reese_1190.jpg");){kind=small}
|
"REESE" - Low Rounded Shackle.The reverse of the case is the same as the obverse.
Nickel plated finish.
Mfg by: Reese Padlock Co. "The Jon Kolozvary Collection" |
1190 |
![](Javascript: show_picture("pictures/panwdi/rising_sun_829.jpg");)
|
Rising Sun - Wavy Reverse Design 2.
2.427" high x 2.250" diameter x .622" deep.
Nickel plated finish.
"X3" is stamped on the obverse of the shackle. "MADE IN USA" is stamped on the
reverse of the case at 12 o'clock.
Mfg by: Safe Padlock & Hardware Co.
More...
"The David Heuermann Collection" |
829 |
![](Javascript: show_picture("pictures/panwdi/royal_836.jpg");)
|
"ROYAL" - No Indents. Nickel plated finish. Made for: Simmons Hardware Co. More... | 836 |
![](Javascript: show_picture("pictures/panwdi/royal_1256.jpg");)
|
"ROYAL" - 1 Indent Top. There is 1 indent on the reverse of the case in the center on top. Made for: Simmons Hardware Co. More... | 1256 |
![](Javascript: show_picture("pictures/panwdi/royal_1227.jpg");)
|
"ROYAL" - 1 Indent Bottom Left. There is 1 indent on the reverse of the case in the center bottom left. Made for: Simmons Hardware Co. More... | 1227 |
![](Javascript: show_picture("pictures/panwdi/royal_69.jpg");)
|
"ROYAL" - 2 Indents Bottom. There are 2 indents on the reverse of the case in the center bottom. Made for: Simmons Hardware Co. More... | 69 |
![](Javascript: show_picture("pictures/panwdi/royal_539.jpg");)
|
"ROYAL" - 3 Indents.
2.496" high x 2.199" diameter x .618" deep.
Nickel plated finish.
There are 3 indents on the reverse of the case in the center. Made for: Simmons Hardware Co.
More...
"The David Heuermann Collection" |
539 |
![](Javascript: show_picture("pictures/panwdi/samson_us_841.jpg");)
|
"SAMSON" - "•U•S•" - 2 Pins - Wide "•U•S•".
2.438" high x 2.133" diameter x .573" deep. This padlock appears to be made of
chrome or nickel, not the usual iron composition. "The Mike Pitman Collection" |
841 |
![](Javascript: show_picture("pictures/panwdi/samson_us_540.jpg");)
|
"SAMSON" - "•U•S•" - 3 Pins - Narrow "•U•S•". "The Mike Pitman Collection" |
540 |
![](Javascript: show_picture("pictures/panwdi/samson_us_1187.jpg");)
|
"SAMSON" - "U S" - 3 Pins". The pin placement is different than that of #540. | 1187 |
![](Javascript: show_picture("pictures/panwdi/secure_t2_542.jpg");)
|
"SECURE" - USA. 2 1/8" diameter. "MADE IN U.S.A." is stamped on the obverse at 7 o'clock. Mfg by: Reese Padlock Co. More... | 542 |
![](Javascript: show_picture("pictures/panwdi/secure_t1_541.jpg");)
|
"SECURE" - No USA. 2 1/8" diameter. Mfg by: Reese Padlock Co. More... | 541 |
![](Javascript: show_picture("pictures/panwdi/secure_1257.jpg");)
|
"SECURE" - No USA - Antique Copper Plated.
2.327" diameter. Mfg by: Reese Padlock Co.
More...
"The David Heuermann Collection" |
1257 |
![](Javascript: show_picture("pictures/panwdi/texas_543.jpg");)
|
"TEXAS" - Fraim.
Mfg by: E. T. Fraim Lock Co. "The Jon Kolozvary Collection" |
543 |
![](Javascript: show_picture("pictures/panwdi/texas_720.jpg");)
|
"TEXAS" - Slaymaker. Mfg by: Slaymaker. | 720 |
![](Javascript: show_picture("pictures/panwdi/try_me_544.jpg");)
|
"TRY-ME". Finishes: Nickel Plated, Brass Plated. Mfg by: J. Walter Miller Lock Co. | 544 |
![](Javascript: show_picture("pictures/panwdi/wilanco_840.jpg");){kind=small}
|
"WILANCO".
The reverse of the case is plain. The design of
this padlock is very similar to that of "CHARLTON" #837. "The Jon Kolozvary Collection" |
840 |
![](Javascript: show_picture("pictures/panwdi/winner_545.jpg");)
|
"WINNER". Nickel plated finish. Mfg by: Slaymaker. | 545 |
![](Javascript: show_picture("pictures/panwdi/yale_546.jpg");)
|
"YALE THE YALE & TOWNE MFG. CO. STAMFORD CONN. U.S.A.".
2.555" high x 2.335" wide x .764" deep. Iron case with brass plated steel panel
inset on obverse and reverse. Mfg by: Yale & Towne Mfg. Co. Charles A. Erichson Patent # 893316.
Charles A. Erichson Design Patent #
D38773.
"The David Heuermann Collection" |
546 |
![](Javascript: show_picture("pictures/panwdi/yale_1230.jpg");)
|
"YALE CANADIAN YALE & TOWNE LTD ST CATHARINES ONTARIO". Iron case with brass plated steel panel inset on obverse and reverse. Mfg by: Canadian Yale & Towne Ltd. Charles A. Erichson Patent # 893316. Charles A. Erichson Design Patent # D38773. | 1230 |
![](Javascript: show_picture("pictures/panwdi/yale_junior_547.jpg");){kind=small}
|
"YALE JUNIOR MADE IN U.S.A. THE YALE & TOWNE MFG. CO.". Iron case with brass plated steel panel inset on obverse and reverse. Mfg by: Yale & Towne Mfg. Co. Charles A. Erichson Patent # 893316. Charles A. Erichson Design Patent # D38773. More... | 547 |
![](Javascript: show_picture("pictures/panwdi/yale_junior_230.jpg");)
|
"YALE JUNIOR CANADIAN YALE & TOWNE LTD ST CATHARINES ONTARIO". Iron case with brass plated steel panel inset on obverse and reverse. Mfg by: Canadian Yale & Towne Ltd. Charles A. Erichson Patent # 893316. Charles A. Erichson Design Patent # D38773. | 230 |